Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateTrusted Garage Door Spring Repair for Spring Homeowners
When a garage door spring lets go, the door usually won’t lift more than a few inches, and it can happen with no warning at all. That’s the moment most homeowners in Spring start calling. We specialize in garage door spring repair, and spring work is the core of what we do rather than a side job. Our technicians have up to 10 years of experience with torsion and extension systems, and they know the difference between a worn spring that’s still holding and one that’s about to snap.
Same-day service is available in Spring for spring failures, and a quick call to (855) 337-1360 usually gets a technician headed your way. We quote the price before any work starts, so there’s no surprise when the job is done. Our local reputation is built on clear diagnostics and honest pricing, and we’ll tell you plainly whether you’re looking at a single spring or a matched pair that should be replaced together.
What Our Garage Door Spring Repair Service Includes
Spring repair isn’t one job. Depending on your door, it could mean replacing a torsion spring on the shaft above the door, an extension spring running along the tracks, or adjusting tension that’s drifted out of balance. Here’s what each part of the service covers.
Torsion Spring Replacement
Torsion springs sit on the metal shaft above the door and provide the lifting force through a winding system. When one breaks, the door becomes very heavy and you’ll usually hear a loud bang from inside the garage. We replace the broken spring and, when the paired spring shows wear, we explain why replacing both at the same time keeps the door balanced. We also reset the winding to the correct tension for your door’s weight.
Extension Spring Replacement
Extension springs run horizontally along the tracks on either side of the door and stretch to lift it. They’re common on older doors and on many Wayne Dalton and Craftsman models we work on around Spring. We replace stretched or broken springs, check the pulleys and cables they attach to, and make sure the door travels evenly across both tracks.
Broken Spring Repair
A broken spring is the most common reason a garage door stops working, and it’s almost always obvious: the door won’t open more than a foot, or it won’t open at all. We diagnose whether the break is the spring itself or the cable and drum assembly it connects to. Then we replace the failed component and verify the door’s balance before we leave.
Spring Adjustment
Over time, springs lose tension and the door starts to feel heavy, drift down, or stop short of fully opening. Adjustment corrects the tension without replacing the spring when the spring itself still has life in it. We measure the door’s balance and set the tension so the door moves smoothly through its full travel. This is a job that requires proper winding bars and training; it isn’t something to attempt with hand tools from the garage.
Safety Cable Installation
Extension springs should be threaded through a safety cable that contains the spring if it breaks. Without one, a failed spring can snap across the garage with real force. We install safety cables on doors that don’t have them and inspect existing cables for rust or fraying. It’s a small addition that makes a real difference in how safely the whole system fails.
Spring Inspection
An inspection checks the springs, cables, drums, and rollers as one system rather than just looking at the spring that broke. We look for corrosion, gaps in the coils, and uneven wear that suggests the other spring is close behind. If everything checks out, we tell you that. If something needs attention soon, you’ll know exactly what and roughly when.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Brands We Service for Garage Door Spring Repair
We work across LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor equipment, and we know where each system tends to wear. A Wayne Dalton extension spring setup and a Clopay torsion system behave differently under load, and the replacement parts aren’t interchangeable. Because we handle so many of these brands, we can usually identify your system quickly and tell you what’s involved.
Brand knowledge matters less for the spring itself than for the rest of the system attached to it. The way a Raynor door is balanced and the way a LiftMaster opener is set to push against that balance both affect how the springs wear over their life. Whether you have a LiftMaster opener and a Clopay door or any other combination, we can help. From a single snapped spring to a full replacement, one call covers it.
Signs You Need Garage Door Spring Repair Right Now
Some spring problems announce themselves loudly. Others give you warning first. Here’s what to watch for.
- A loud bang from the garage. A torsion spring breaking sounds like a firecracker going off. If you heard it and the door no longer lifts more than a few inches, a spring has almost certainly failed and the door shouldn’t be operated until it’s repaired.
- The door feels extremely heavy. If you can lift the door a little and it feels like dead weight, the springs aren’t carrying it. Stop lifting it, because the full weight of a garage door resting on a failing spring can do damage to the door and to you.
- Visible gap in the spring coils. A broken torsion spring shows a clear gap where the coil separated. It’s often visible from the floor if you look at the shaft above the door, though we don’t recommend reaching up to inspect it closely.
- The door opens crooked or stops halfway. Uneven travel can mean one spring is worn while the other still has tension. This puts extra strain on the tracks and opener, so it’s worth checking before the opener is damaged too.
- Stretched extension springs. Extension springs that no longer return to their original shape have lost their ability to lift the door safely. If the coils look stretched or the door sags on one side, the springs are near the end of their life.
Our Garage Door Spring Repair Process – Step by Step
- 1
Phone diagnosis and scheduling. When you call (855) 337-1360, we ask what the door is doing, whether you heard a noise, and what brand you have. That helps us bring the right parts and arrive prepared, and it tells us whether same-day service is realistic.
- 2
On-site inspection and measurement. The technician inspects the spring system, the cables, and the door’s balance. We measure the door’s weight and the existing spring dimensions so the replacement matches what the door was designed for, rather than guessing from a catalog.
- 3
Written quote before any work. We explain what failed, whether both springs should be replaced together, and give you a written estimate. Work only starts after you’ve agreed to the price, and that price is what you pay.
- 4
Repair and calibration. The replacement is installed and wound to the correct tension, then the door is cycled several times to check travel, balance, and how it engages with the opener. Cables and safety components are checked while we’re in there.
- 5
Final testing and walk-through. We test the door under load, show you what was replaced, and answer any questions about the new springs and how to keep an eye on them. You’ll know what normal looks like so you can spot a problem early next time.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Spring Repair Cost in Spring?
Spring repair in Spring typically runs $180 – $340 for a single spring, depending on the spring type and the door’s size. A matched pair is usually replaced together, so a pair costs about twice that range. Here’s how common scenarios tend to break down:
- Single torsion spring replacement: $180 – $340, including labor and the new spring.
- Matched torsion pair: about $360 – $680, since both springs are replaced as a set.
- Extension spring replacement: $180 – $340 per spring, and extension springs are typically replaced in pairs as well.
- Safety cable installation: quoted as part of the spring job when cables need to be added or replaced.
What affects the price: the spring type, the door’s height and weight, whether the cables and drums need attention at the same time, and how accessible the spring system is. If a cable is frayed or a drum is worn, it’s cheaper to handle it during the same visit than to have a second failure later.
How to avoid overpaying: get the quote in writing before the work starts, ask whether both springs are being replaced or just the broken one, and confirm what’s included in the price. A free estimate means we inspect the system and quote you with no obligation, and the written estimate sets the final price. Call (855) 337-1360 for an exact quote; estimates are free.
Garage Door Spring Repair Near Spring – Our Service Area
We serve Spring and the surrounding area, including Porter Heights, Oak Ridge North, Humble, Shenandoah, Aldine, The Woodlands, Atascocita, Tomball, Woodbranch, Patton Village, and Jersey Village. Response times depend on where you are and how busy the day is, but we aim to get to spring failures the same day when we can. If you’re near one of our other service areas, you can read more about garage door spring repair in Porter Heights or garage door spring repair in Oak Ridge North.
Serving Spring, TX – Our Local Coverage Area
We serve Spring and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Garage Door Spring Repair in Spring
Garage door spring repair is the replacement or adjustment of the torsion or extension springs that counterbalance the door’s weight. Without working springs, the door is too heavy for the opener or a person to lift safely. The job involves removing the old spring, installing a matched replacement, and setting the tension correctly. It’s work that requires special tools and training, and it’s not a safe DIY project.
Most spring repairs take a couple of hours once the technician is on site. A single torsion spring replacement is usually quicker than a paired replacement or a job where cables and drums also need attention. The time also depends on the door type and whether the spring system is easy to reach. We’ll give you a realistic time estimate when we quote the job.
A single spring runs $180 – $340, and a matched pair is usually about twice that because both springs are replaced together. Cable repair, if needed, runs $130 – $250, and opener repair runs $120 – $320 if the opener was damaged when the spring failed. The written estimate sets the final price, and that price is agreed before any work starts. Call (855) 337-1360 for an exact quote; estimates are free.
Yes. We work on Wayne Dalton, LiftMaster, Chamberlain, Genie, Clopay, Amarr, Craftsman, and Raynor equipment. That includes the spring systems on those doors and the openers attached to them. If your door or opener has a brand you don’t see listed, call us and we’ll tell you whether we can help.
Same-day service is often available in Spring for spring failures, depending on the schedule. Spring problems are the most common failure we handle, so we prioritize them. Call (855) 337-1360 and we’ll tell you what’s available for your address. If we can’t get there the same day, we’ll book the soonest slot that works for you.
We stand behind the work and the parts we install, and we’ll explain what’s covered when we quote the job. The details depend on the spring type and the manufacturer, so we go over it with you before the repair starts. If something isn’t right after we leave, call us and we’ll look at it.
Clear the area under and around the garage door so the technician has room to work. Keep the door closed and don’t try to force it open, especially if you’ve heard a spring break. Move vehicles out of the garage if the door won’t open, and let us know if there’s anything unusual about the door’s behavior. That’s all you need to do; we handle the rest.
Schedule Your Garage Door Spring Repair Service in Spring Today
A broken spring leaves your door stuck, and it won’t fix itself. Call (855) 337-1360 and we’ll arrange a free estimate for spring repair in Spring, often the same day. We quote the price before any work starts, so you’ll know exactly what you’re paying. Garage doors are all we do, and spring work is our specialty. Get in touch today and let’s get your door moving again.
Written by the team at Spring Garage Door Repair Pros.